This is a regular ‘feature’ on the Internet BOB. So having prepared this on my Craft writing space, I thought I would share it here also.

Commuter/tourer. Main ride to work, also main machine for light or credit-card touring. 1994 Shogun Alpine GT, converted to 650B. Fork by Joe Cosgrove. Downtube logo says ‘Sholto’ in memory of a friend. Love this bike and ride it just about every work day.

Road bike. Frezoni made by Joe Cosgrove, a framebuilder who lives about 2 km from me in Brisbane Australia. Joe’s primarily known for doing the paintwork on Llewellyn bikes.

Cyclocross/gravel bike. 2011 Cannondale CAAD-X. Just a couple of years before cyclocross bikes switched to discs. I now run a 1x setup, and it has mini-V brakes rather than cantis.

Bikepacking bike. Based on a 2011 Specialized Carve aluminium frame. Currently has a Trifox carbon fork. Fantastic device for long steady days on a rail trail or a back road through the bush.

Mountain bike. 2016 Kona Precept. 27.5 wheels, dual suspension. Cos singletrack is the best fun.

Folding bike. Brompton. Cos every home needs a Brompton.

Trip notes from New England Cycle Trail (South)

Day 1. Armidale to Uralla, 35km

NECT day 1: Armidale to Uralla - Andrew D.’s 35.1 km bike ride

Our group of four assembled in Armidale after taking various driving options to get there. I drove down from Brisbane with a 6 am start from Salisbury giving us plenty of time for coffee stops and lunch at Armidale before the short ride to Uralla in the afternoon.

The Day 1 route into Uralla was all back roads, and stayed entirely off the New England Highway. Big tick.

Just a couple of km on gravel roads to get us across to Thunderbolts Way for the last three km into town. Good route.

I picked some poorly positioned motels for this trip, managed to select those well away from town centres, through not paying sufficient attention to the size of the towns and the positioning of likely dinner venues (i.e. pubs).

Uralla had a great cafe: the Alternate Root. And we enjoyed our dinner at the Top Pub.

Day 2. Uralla to Walcha. 62km

NECT day 1: Armidale to Uralla - Andrew D.’s 35.1 km bike ride

And this is where the story really starts. As I look back on this week of cycling, my strongest memories are of rolling countryside and smooth gravel roads. This day was cold and overcast, averaging 10 degrees Celsius for the day, but my abiding memory is of the colours of the leaves and the gentle rolling hills.

After a short climb out of Uralla, we left on Gostwyck Rd, past some roadworks which made a clay road quite sticky. All of us got chunky bits of gravel sprayed over the lower parts of our bikes. But once through the roadworks, the roads dried out and conditions were cool but near perfect.

At Gostwyck we were entranced by the avenues of elms leading to All Saints Chapel, a picture-perfect place for a wedding I’m sure. We rolled south, climbing and descending throughout the morning.

Closer to Walcha we got back on some bitumen for a nice roll into town, and some lunch at Cafe Graze. This was a great morning’s ride, with enough challenge in climbing to make us hungry for lunch, enough rolling downhill to enjoy after any climb, and plenty of amazing autumn colours of reds and yellows in the New England foliage. Lots of oaks, elms and liquid amber trees, showing off their decidousness.

Day 3. Walcha to Tamworth. 93km

NECT day 3 Walcha to Tamworth - Andrew D.’s 92.8 km bike ride

This was a highly memorable day on the bike, with a descent nearly 30km, and a loss of 600m of altitude over the whole day’s ride.

The first third of the ride was up and down out of Walcha, with a turn off onto Scrubby Gully Rd. Even early on there was a magnificent descent down to the MacDonald River. The route then climbed away, and then back down to the river a second time.

This was where we got our feet wet. The route crosses the river on Surveyors Creek Rd, just before getting to Woolbrook. Belinda lost one of her croc sandals in the river, which certainly was a tragic moment in fashion.

After Woolbrook, we cruised and hollered and grinned on our way down the valleys created by Jamiesons Creek and then the Cockburn River, all the way to a late lunch at Kootingal (72km)

My route assessments let us down at this point I think. Instead of pulling up at Kootingal, we braved the weekday afternoon traffic into Tamworth, a busy city with many trucks and buses. Our motel was on the New England Highway, which was also hard to get too.

Day 4. Tamworth to Quirindi. 115km.

NECT day 4: Tamworth to Quirindi - Andrew D.’s 115.6 km bike ride

This was the “Queen Stage” of our trip. I was a little concerned about my ability to ride the whole route and still finish in daylight, because there was a substantial amount of climbing, and because the previous day a ride just short of 100km saw us get into town with only an hour of sunlight to spare.

So we set off from Tamworth and rode a normal pace through to lunch at Nundle. On the way we rode through an historic goldmining era place with the charming name of Bowling Alley Point.

The steady climb up the Pool River valley, past Chaffey Dam, was one thing. We gained 200m of elevation.

But straight out of lunch (at the charming small town of Nundle) it was a false flat bitumen road leading to the only sustained climbing section of the whole week (for me).

Fortunately the climb on Old Wallabadah Rd was steady and pretty scenic, distracting me from the pain in my legs.

Eventually we reached Wallabadah, after a short but stimulating ride along the New England Highway. The last bitumen section riding west to Quirindi was ridden at breakneck pace, as we chased the sun going down before our eyes.

Day 5. Quirindi to Tamworth.

Route planned

NECT day 5 Quirindi to Tamworth - A bike ride in Quirindi, NSW

Our route as ridden

NECT Day 5: Quirindi to Tamworth - Andrew D.’s 67.4 km bike ride

Our day started with a little adventure. Just leaving Quirindi we turned right onto Bells Gate Rd, which our GPX route showed as a minor road which would link up to Black Gully Rd as a back roads route into Werris Creek, keeping us off the major through routes.

However, as we crossed the railway line after 7.5km of the day’s ride, we lost the trail. The road we were on became a farm driveway, and the GPX track was telling us to ride where there didn’t seem to be any road. Eventually Derek looked further along and saw a farm track which disappeared over a small rise. So we gulped hard and found a way across a small gully to link up with the double track.

It was only a couple of km later that the double track became a proper gravel road again, but for all that time I had a gnawing feeling in the pit of my stomach.

The wisdom of this route at keeping us away from the main road (Werris Creek Road) was made clear to us all, after our morning tea stop in Werris Creek.

We had 26km on the main road, and it was not a nice ride. Big trucks going at 100km/h only a couple of metres from you is never fun.

We got to Duri and thankfully our route planners had found another quiet road to get us all the way into Tamworth. A bit of bike path work saw us all the way into Tamworth’s very busy CBD.

The New England Cycle Trail (south) is a great ride. If I was doing it again I would stay in Kootingal rather than Tamworth on our way south, and I would look extra hard for any connecting back roads between Werris Creek and Duri, cos that road was no fun at all.

For me, the train trip from Tamworth back up to Armidale was a delight, although the bike box supplied by NSW TrainLink was one of the smallest I’ve ever used, and required A LOT of bike disassembly.

_2025 Update: _ Some of the minutae about bags and loading the bike up for a trip have changed over time. See the latest version, at the end of the article.

If I look at my stable of bikes, and how much each one gets used (available on Strava), you might get the feeling that my Carve 29er isn’t one that I really like.

It languishes down in fourth place with ‘only’ 4000-ish km, trailing the Sholto bike, the Frezoni, and my cyclocross/gravel bike, the CAAD-X.

But the Carve 29er occupies a very special place in my memories. It’s the bike on which I have bikepacking adventures.

Ten years ago when I started getting into this new style of cycle touring, it was only natural to fit some bags to my hardtail 29er and get rolling.

My Carve has an origin story that I’m going to suggest is unlike most other bikes, and it’s going to sound weird when I tell it.

In 2011 I had bought a Cannondale RZ OneTwenty dual-suspension mountain bike. And I really enjoyed that bike, it was great fun on all the trails around Brisbane and SEQ. And the bestest best bit of that excellent bike was its Lefty fork.

The Lefty is a strange beast, and unless you have ridden a bike with a Lefty, I don’t expect you to understand. But a well-tuned Lefty on a trail or XC-style mtb is a total joy. Super responsive, lightweight, laterally stiff, just a really cool thing to have on the front of your dually.

And one day I am idly being idle and I noticed a secondhand Lefty for sale on eBay. I put a bid on it, not really expecting that my offer would win the bid. Which it did. At this remove I don’t remember what I paid for the Lefty, but I think less than $200. And those things were very spendy back in the day.

Ok, so I’ve got a Lefty.

And it sits in my bike shed, mocking me, for about six months.

Next thing my friend JD has a Specialized Carve 29er frame for sale. JD had bought the Carve as a complete bike from Epic Cycles only a few months before, but then had been seduced by a gorgeous Ritchey P29 steel frame in red, white and blue. So JD swapped all the components off the Carve onto his new Ritchey.

And the Carve frame in basic black was left behind. It’s an aluminium 29er frame from 2011-12. The geometry of the time is very dated now (70 degree head angle anyone?) but it still works great on dirt back roads and most point-to-point style trails.

So I thought: that’s a low cost way to get the Lefty onto a bike, and perhaps get into bikepacking. Even though there are easily foreseeable downsides to having a Lefty on a bikepacking steed.

I bought a Shimano SLX groupset (drivetrain, shifters and brakes), hunted around for bits and pieces, and snagged a pair of wheels from Aiden Lefman when I approached him for help in servicing and fitting the Lefty (Aido runs a mtb suspension specialist firm, Cyclinic).

And there it was: a matte black medium sized 29er hardtail, with out-of-place Cannondale Lefty fork.

I did a few micro-adventures on it, but its first starring role was in 2014 when I rode the Munda Biddi Trail.

And ever since then, most every big adventure I’ve been on (except for two) has been on the Carve.

And as a hardtail mtb for having adventures on, it has been just about flawless.

Over time, the Lefty became slightly troublesome. Lefty forks have an issue known as ‘bearing migration’.

When the bearings migrate on your Lefty, you can go from 110mm of travel to 50mm of travel in hardly any time. Or worse.

Many Lefty owners get used to fixing this issue while out on the trail. I never got used to fixing it all, regardless of on the trail or in my shed.

Before a bike packing trip I would take the Carve to my mechanic, and ensure (among other things) that the Lefty had full travel, and off I would go. Sometimes it would lose a little bit of travel over a couple of weeks, but it never became a major concern.

But when I took the Carve to Dave (my mechanic) on my return from the Mawson Trail, he called ‘time’ on the Lefty. Too much trouble with the bearing migration, and performance in absorbing bumps had also got worse over time.

“Just find a carbon fork for this bike, you only use it for bikepacking so it doesn’t really need suspension. A carbon fork will make the bike feel lighter and more lively,” Dave said.

I agreed. He was right.

Carbon forks for 29er mountain bikes are pretty easy to find, but also can be somewhat expensive. I’m pretty wary of over-capitalising any of my bikes, and this one in particular would not gain one dollar of resale value by being shod with a fancy Whisky or Salsa fork.

So after a cautious search on AliExpress, I purchased a Trifox brand carbon fork, and Dave installed it.

So far (several quite taxing day rides, and one overnighter along the BVRT and South Burnett back roads) so good. The bike does feel lighter, although I should qualify that statement cos it has not yet had a full camping load on board.

The Trifox fork didn’t have adventure mounts, so thanks to BarYak for producing the Mule, a system for attaching mounting points. I’ve got the Blackburn Outpost cargo cages, and on a recent overnighter the BarYak - Blackburn combo worked well.

Over the years I have used a variety of bags on the Carve to carry the gear you need for travelling around by bike. I have setup routines for pub overnighters, for full-on two-week-long camping trips, and everything in-between. See the photo at the top of this post as one example.

My favourite bags for the Carve have been the two frame bags I’ve used.

My original frame bag was made for me by my friend Dean. We used two existing nylon bag, of the giveaway type. One side was a Brisbane City Council City Cycle bag, and the other was a Griffith Unversity bag. The resulting frame bag had a real ‘rasta’ flavour with green edging, yellow one side and red the other.

After a couple of years the CityCycle side gave way … it was made from a very cheap nylon. So I asked my friend Brad to make me another bag, this time from cordura, and I have been using that one ever since. It fits a water bladder with about 2.5 litres of water quite comfortably, along with a pump and a few tools.

The rest of the kit varies. I mostly use a rear rack with bags hanging off it, rather than a large seat bag, cos my short legs (I have Duck’s Disease) don’t give me all that much clearance from the seat down to the tyre. And upfront I often use a Azur handlebar roll that came my way to review for Australian MTB mag.

I like the way the Carve rides when loaded. Without a load it was a bit twitchy on singletrack in its Lefty days. These days it doesn’t have a suspension fork, so the dampening effect on the handling of all the extra load won’t be there in quite the same way.

The Carve is also I think the epitome of the idea that a bikepacking bike doesn’t need to be flashy to be good. The Carve’s aluminium frame was literally a castoff from a friend who didn’t want it.

But in the intervening 10 years it has been a brilliant machine to own and ride. We’re still on the original drivetrain (more or less), original brakes, original handlebar (a SQ Labs trekking bar). And with one tiny exception (when I buckled a rear wheel one day) the Carve has always got me where I wanted or need to go each day that I’ve set out on it.

So that’s a pretty good endorsement. I’m hoping for another 10 years of bikepacking adventures on it.

**What’s different at the start of 2025: ** I rode the Carve with Trifox fork on a rail trail tour from Ipswich to Marybrough in August 2023, and on the Munda Biddi Trail in September/October 2024. The main change from previous setups was at the front of the bike. I bought a Jack the Rack in the Kickstarter, and it gives a great platform for a front bag. My bag is from Buffalo Bags in Thailand … it is called a Big Buffalo, but mine is the smallest size. I run a couple of 1.5 Litre water bottles on the Blackburn Outpost cages on the forks, which gives me room in the frame bag for weighty stuff such as my travel CPAP machine and its battery.

A little while ago on this very website, I answered the question that everybody wants to know: “How many bikes do I need?”

I’ve just added a new bike to my shed, so I thought it might be fun to look at the principle stated in that earlier article and see how it applies to the bikes I currently own.

Controversially, my thesis discards N+1 as a guide for working out how many bikes you need, and replaces it with the idea that the right number of bikes is one.

So if you want to go road riding, you need one bike, a road bike.

If you want go mountain biking, you need one bike, a mountain bike.

If you want to race cyclocross / go touring or bikepacking / travel with a bike, you get the point.

At the moment, the number of one bikes I have is seven.

A road bike, a cyclocross bike, a dual-suspension mountain bike, a touring/commuting bike, a bikepacking bike, a folding bike, and an e-bike for shopping and commuting.

And the reason that this method holds up to the vicissitudes of life is that even though I have bikes for specific purposes, each of those bikes are actually quite versatile, and can easily fill the roles adjacent to their purpose.

So here we go. A complete rundown of the Briztreadley stable of bicycles, where they came from, and how long I have owned them, and what each one means to me.

I’m going to do this as a series of posts, probably over a few weeks. I probably won’t “announce” it until its all finished.

• My bikepacking bike: the Carve 29er
• My touring/commuting bike: the Sholto

Fiona on a steel bike, me on an aluminium bike. Loaded up and trucking and having the time of our lives.

I read plenty of stuff about bikes, both online and in magazines. Have done so for decades.

And one thing that I read often (so often!) in discussions and comparisons of bikes is that there is a discernable difference between bikes based on the material the frame is made from.

And this mostly is expressed as a diss for aluminium as a frame material.

Australian Geographic has just released a ‘guide to bikepacking’, which says the following, inter alia: " Aluminium is light, and it is cheap, but you will cop a jarring ride".

Can I get some science to go with this unsubstantiated opinion?

Specifically some science that shows that in a system which includes pneumatic tyres with up to 10 mm of “give” that a rider can tell the difference between the so-called “ride quality” of a metal (steel, titanium or aluminium) or carbon fibre frame.

I currently own six bikes. There is a road bike (Frezoni custom steel), a cyclocross bike (Cannondale CAAD-X), a touring bike (Shogun Alpine GT), a hardtail mountain bike (Specialized Carve), a folding bike (Brompton), and a commuter e-bike (built it myself, but the frame is a old Cecil Walker steel touring frame).

Four of my bikes have steel frames, and two have aluminium frames. In the past I have also owned titanium and carbon fibre framed bikes.

Here are some things which make a difference to how a bike rides:

• Weight (of you and the bike together)
• Frame geometry and how the bike fits you
• Suspension
• Tyres.
• How you feel about life at the time.

Here are the things which have no discernable effect on how a bike rides:

• Colour
• Frame material.

My favourite and most memorable rides are multi-day touring rides, hopefully somewhere scenic and interesting. And from the list above, I will take either the hardtail mountain bike or the touring/commuting bike for those multi-day rides.

One is steel, the supposed gold standard for “ride quality”. The other is aluminium, which Australian Geographic thinks is “jarring”.

I take the hardtail aluminium mountain bike if I think the route will be rough or gnarly.

And the reason is simple: the mtb has bigger tyres. About 55-60 mm wide, compared with 48 mm wide for the biggest tyre which fits the touring bike.

That is all there is to it. The steel touring bike, which is my favourite machine, which I have ridden 14,000 km on in the last four years (since I started using Strava), isn’t the right bike for rougher roads. The bike with the big tyres is.

So why am I so hot under the collar about this issue?

I dislike poor advice, and advice which focusses on the wrong things.

There are plenty of aspects of bike design and construction which are important differentiators that you can look at when buying a bike, and I’ve listed some of them above. Price might also be a factor for most of us, also longevity.

Those authors who push the idea that aluminium has a harsh ride in comparison to steel or titanium might be actually be doing bike buyers a favour.

If an aluminium-framed bike is cheaper and lighter than a steel one (and surely much cheaper than carbon-fibre or titanium), then just buy it. The ride quality you experience will be based on how the total bike fits you, and how the tyres you select work on the road/trail surfaces you ride on.

What won’t be a factor in ride quality? The aluminium. Cos physics.

Don’t believe me? Reckon you can tell the difference between bikes purely on frame material? Email andrew.demack@gmail.com and let’s set up a test.

See also:

• Silca’s Josh Poertner conducted blind tests. He found: “t when riders didn’t know what they ‘should’ feel, they really struggled to find differences in stiffness, compliance and weight between frames or wheels”

• Rob English’s column on the Escape Collective, ‘the myth of vertical compliance’.

In a few short weeks, sometime after EkkaCross, I’m going to go for a bike tour along the Mawson Trail. Yes, I am very much looking forward to it.

It’s a two-week tour on gravel roads and trails, and my friends and I will cover something just a little short of 1000km in those two weeks. From the Flinders Range through the South Australian outback to Barossa Valley vineyards, and finishing with a ride down from the Adelaide Hills into the South Australian capital.

The Mawson Trail is not your first bike tour. It helps to have some experience going into a two-week ride.

But for those people who see photos on Facebook or Instagram from my little adventures and wonder “could I do that?”, let me tell you that there’s nothing special about me, and I’m not any sort of athlete. I am a portly middle-aged man.

So, could you go bike touring? (or as the kids call it these days, “bikepacking”?)

Of course you could. The hardest part is deciding to go.

And here are some rides that I think are easy starter trips. You could do these rides with full camping kit, or just staying in pubs or motels.

Short tours around SEQ

• Stradbroke Island (Minjerribah)
• Darling Downs long weekend
• Stanthorpe base camp

Longer tours (which are still pretty easy)

• Central West Cycle Trail (NSW)
• New England Cycle Trail
• Orange 360 (NSW)
• Kilkivan to Ipswich on Queensland’s rail trails.

Longer tours which are slightly harder

• Stanthorpe to Ipswich
• The Great Queensland Rail Trail Adventure.
• The Munda Biddi Trail.
• The Mawson Trail

I shall put up a page describing each tour, so when the link goes live, there will be a description of each tour, including logistical challenges that need to be met, and a link to my Airtable database for each tour, with route plan and accommodation plan.

Hope you find this useful! Let me know if you go on any of these trips!

My touring / commuter bike (the Sholto) has had a long and varied career. And ever since I turned it into a 650B bike, it has firmed more and more as my favourite.

That is partly because of it’s versatility. The Sholto is good for commuting to work, for riding overnight or weekend tours on a mixture of rail trail, back roads and gravel roads. It is not the lightest bike, but I am not the lightest rider, so I tend to forgive those sins.

It is also partly about our shared history, and the memories associated. I have owned this bike since I turned 30 in 1994. I went on my first bike tours with the Shogun (as it was then). It was also my first cyclocross bike, at which role it was also quite awesome.

About the only thing I don’t really like about the Sholto is the brakes (currently Tektro CR720 cantilevers). They’re fine. They aren’t great. They aren’t terrible. Just OK.

I like everything else. I like my position on the bike, it’s very relaxed, but it still feels like I can power along when required. I like the range of roads, trails, and surfaces that the Sholto is comfortable on. I like being able to put on the Vittoria Terreno tyres or the Teravail Washburns, when I want a wider tyre (almost 50mm) with plenty of grip for the dirt roads. I like going back to the Grand Bois Hetres 42 mm slicks for rolling along the commuting roads, or heading out to Cambooya on a weekend tour on mostly bitumen.

I like the myriad of options for being a contender in the #CarryShitOlympics. I have a cool basket for carrying all sorts of stuff, I have a deadly front rando bag, I have great front panniers, I have a small but surprisingly capacious saddle bag, I have the Cranktank for carrying 4 litres of water on long thirsty days and now I have a custom made in Ukraine frame bag, which lets me carry a 2 litre water bladder and plenty of other stuff in the main triangle of the bike.

I like that the Sholto was a standout performer on a recent 9-day tour. The only moments of concerns I had for 9 days were a couple of punctures, and you’re always going to get them from time to time. I’ve had very few flats in the last couple of years, so I was probably due.

I also like the alignment of the Sholto with the “reduce / reuse / recycle” mantra. I am trying to convince myself that there’s nothing that newer gravel/adventure bikes can do that the Sholto cannot also do.

And mostly I am convinced. New bikes are shinier and newer, but are they going to be better suited to my particular combination of commuting and touring? And would the new bike feeling last more than a week before it just felt like the bike you have had forever?

The Sholto bike’s 30th birthday will be here before I know it, in 2024. And with very long timelines currently for getting new bike frames and parts, if I actually do think that it is time for Sholto to retire, what would replace it?

Here is a list of cool gravel/adventure bikes, mostly available as frames that I would build up with my selection of parts. They are all 650B disc brake / drop bar / gravel adventure / touring bikes. Strangely, three of them come from the UK. The first is from Braidwood in NSW.

• Kumo Cycles Raddonneur.
• Shand Stoater
• Fairlight Faran 2.0
• Fearless Warlock

These bikes are listed in descending order of price. Which of course means that the one I am really tempted by is the Fearless Warlock.

I am going to do a decision matrix with these four bikes to see how they stack up against the Sholto. But my sense of it is: I could spend $4000 on a new bike (that’s my ballpark pricing on a built-up Fairlight Faran), and it would absolutely be better than the Sholto. But $4000 better? (Whatever that means). I suspect not.

I might change my mind tomorrow. The Sholto might break again. I don’t know what the future holds.

But I do know that the current build of the Sholto brings me a lot of joy. And maybe when I fit the new Swiss Stop brake pads I have in the shed, the brakes will become awesome and the bike will be perfect.

Next big idea: Ipswich to Hervey Bay: BVRT, KKRT, BNT and back roads to Tiaro, Mungar.

And Mary to the Bay Rail Trail is being built full speed ahead by Ken McDonald’s magnificent low-cost construction crew.

And here’s the tricky bit, connecting Kilkivan to Maryborough. Mark Roberts has mapped a route from Kilkivan to Gympie and I’ve adapted a section of it for Kilkivan to Woolooga. Then it’s OK to go via Miva and Theebine etc and so on. Back roads heaven.

Part 9 of 10.

Previously Day 7 Eidsvold to Mungungo

Next Day 9 Ubobo to Gladstone

Strava links

• Day 8 Mungungo to Barrimoon siding
• Day 8 Barrimoon siding to Ubobo

Distance: 71.8km

2025 Update: The Grand Hotel Many Peaks is now open. Many Peaks is a great place to stay, or at least. Check in with Desley and Craig, the new owners of the Grand Hotel for meals and accommodation!

Kirsten’s Cottage at Builyan is no more. The Creative Arts cafe which replaced it is listed as being open on Friday, Saturday and Sunday, but it would be good to check that information before relying on it!

Original text:

Well, we made it. Even though we were reduced in number, even though I think we got slower day by day towards the end, even though we had some long days in the saddle, we made it.

When I first heard from Desley O’Grady that a date had been set for the opening of the tunnels section of the BBIRT, I knew I wanted to attend. And as I reflected on my conversations about how BBIRT might interact with other rail trails, I also knew that somebody would have to be the first to try and piece the trails together.

So this whole ride was about today’s event. But it’s a great ride, regardless. As a bike-touring route at the right time of year (I would NOT do this ride in summer, for instance), this has very little traffic, no really hard days, and many good towns to stop at. As 700km rides in Australia go, this would be one of the easiest!

We set out this morning fueled by breakfast supplies we had bought the day before in Monto. The trail opening event would commence around 10.30, and we had about 30km of gradual elevation gain to get there. The Gladstone-Monto Rd is bitumen, but doesn’t have a large volume of traffic, and on this particular Saturday morning I suspect at least half the vehicles which passed us were going to the same event as us.

We made it to Kalpowar for a toilet stop and a quick look around, and then onto rough gravel roads for the next 5km to Barrimoon siding.

The BBIRT crew have put out signs which direct you to Barrimoon siding, and I’m sure they will still be in place, or replaced by more permanent ones in the future. It will be even better when you can use the rail alignment straight from Kalpowar – the bridge over Cabbage Tree Creek might be an impediment to that, I don’t know.

So we joined the crowd of about 400 people who had gathered for the event. We saw plenty of friendly and familiar faces, and mingled and chatted and ate a burger, and slurped a coffee.

Then the speeches happened, and the trail was opened. The support from local and state government for this project was evident in the fact that the Mayors of North Burnett and Gladstone councils were both there and cheering it on, as was the State Member for Gladstone, who announced some funding to enable the trail head to become wheelchair accessible.

But the driving force behind getting this trail open has been the BBIRT community group. Yes, they are well connected into local government – Desley O’Grady is on Gladstone Council. But very little of the work done before this event was done by Councils or TMR. It was all organised by BBIRT (working with the permission of TMR, of course. BBIRT has a licence allowing them to improve the trail corridor).

After speeches and photos and filming and farewells, we got riding on the newly opened trail around 12.30pm.

From Barrimoon siding down to Golembil is the spectacular initial section of the new trail. And it is worth every last bit of the time, effort or money it takes to get you there.

I have ridden plenty of rail trails in Australia. And this is (potentially) the best one. A little more work on the surface and it will be the best one.

There are six tunnels in the 5km from the top of the Dawes Range at Barrimoon. And the trails rolls through each of the tunnels, and in between there are views of the range all around. Just down the valley from here is a town called Many Peaks. And you can see why, as you cruise on the 11 km downhill to Golembil bridge.

We took quite a few photos on the day, and I took pix last time I was there as well. And all I can say is that it would require a much better photographer than me to do justice to what a beautiful ride this is. You have to go and do it yourself.

From Golembil, the trail continues along the valley towards Many Peaks (NOW WITH PUB!), and eventually Builyan, where there are toilets and Kirsten’s Cottage, which is sadly no longer open.

The trail along here has plenty of rough and sandy sections. Wide tyres are a must, and it certainly would have been easier without our touring load.

We had a late afternoon tea at Kirsten’s Cottage, which was most welcome. Caramel tart! After a week of bike riding you start to think you can eat whatever you like whenever you like. It’s not true.

We then had about 18km left along the Boyne Valley to Ubobo. And we asked some local folks at Kirsten’s whether there were any hills between Builyan and Ubobo (there were a couple of steep little surprises earlier in the day on the way to Kalpowar).

And the ladies said no, it was pretty flat. Although there would be a hill coming out of the creek crossing just near Larry’s place. So that was helpful, thanks.

We rolled into the Boyne Valley Discovery Centre at Ubobo in the late afternoon. It is a great spot, and I won’t trouble you with all the details of camping options / cabins / showers / camp kitchen etc and so forth. It’s not just the only place to stay at Ubobo, it is also all you would ever need while in Ubobo. Except for Optus mobile phone coverage.

However I will say that if you happen to be there when there is a caravanning/RV club also in attendance, you might get a BBQ dinner (tick!), and breakfast on the next morning (big tick!), and the aural delights of a local country music band playing through the evening (if you really like country music, that might be a tick, but for me I would rather be required to remove a tick from a delicate part of my body than have to listen to what passed for music on this occasion).

Next: Day 9 Ubobo to Gladstone.

Part 8 of 10

Previously: Day 6 Gayndah to Eidsvold

Next: Day 8 Mungungo to Ubobo

Links

• Strava Eidsvold to Mungungo (This is Rob’s Strava, my watch ran out of battery

We’re getting closer to the big day (the opening of the Barrimoon Tunnels section of the BBIRT). Today is the day before, and our little trio of touring bicyclists are starting to feel like we are part of something much bigger.

We had surprising encounters with locals when we stopped for refreshments. At Mulgildie, the man behind the counter at the shop had seen us out on the road, and knew we were riding to the rail trail event. At Mundubbera, a chance encounter at the takeaway cafe saw us chatting to someone who lives next to the rail alignment at Grosvenor Creek (south of Eidsvold), who wanted TMR to remediate the access to her property. At Eidsvold Caravan Park, it seemed everyone we spoke to had either seen us on the road, or knew where were going!

Our ride today saw us take a brief look at the rail trail alignment from Eidsvold heading north to Ceratodus siding. (Ceratodus is a lung fish which lives in the Burnett River, although Wikipedia tells me that botanically the Queensland lung fish is not actually a ceratodus cos they became extinct in the Eocene Epoch.)

Rob and I rode the trail alignment for a couple of km, and then jumped out onto the highway. Belinda on her Hookworm-tyred mtb stayed the course, and said the trail wasn’t too bad (thanks to the work of Michael Whitty, local trail carer).

We turned off the Burnett Highway at the turnoff to Wuruma Dam, and then followed back roads to Abercorn and on towards a rest break at Mulgildie (53km). It was a warm day, and by the time we reached Monto (68km) via Airport Rd we were looking for a cafe with air-con and cold drinks.

At Monto we were recognised again, this time by TMR’s main man in charge of rail corridors, Craig England, who was there for the next day’s festivities.

Eventually we rolled out for the last 13km to the Mungungo Hotel. Once more we were recognised. I saw a ute pass us, with a bike strapped onto the back. The bike had a Jones handlebar. I thought “I bet I know that rider … there won’t be many people bike-nerdy enough to have a Jones bar who I don’t know.”

And sure enough a few km later, there’s someone taking a photo of our trio from the side of the road, and it turns out to be Cliff, a friend from Brisbane who, like us, is into adventure/touring cycling.

Cliff said “I was watching your posts from the first few days of the ride, and just had massive FOMO, so I thought I would come up to Kalpowar for the opening event tomorrow.”

So after a day of being recognised, and feeling like we were part of something bigger than us, we rolled into the Mungungo pub.

When I was planning this trip, I had messaged the Mungungo pub via Facebook to ask if we could camp at the back of the pub, and named the date we would be there, in preparation for the opening of the rail trail the next day.

And the cheerful message came back: ‘For you Andrew, it’s a free room!’

So I said thanks very much, and considered myself some kind of very minor rail trail celebrity.

Of course, when we got to the Mungungo Hotel, the man behind the bar had never heard of me, and my name was not on the booking list for rooms, and the person who had answered my message on Facebook was no longer involved in running the hotel.

Hero to zero in two seconds flat. Hilarious!

For all of that, we did receive a warm welcome at the Mungungo pub, and spent a very pleasant evening there. In terms of other accommodation in the area, if you pressed on to Kalpowar there is both camping and lodge style accommodation there, and there’s a National Park camping area only a couple of km away from the trailhead at Barrimoon siding. But for this trip, Mungungo was the right distance for us, trying to keep the average day to around 80-90km.

Where to stay in Mungungo

• Mungungo Pub

Next: The big day dawns.